Warning adhesive tape, non-slip, standard
Hazard warning adhesive tape self-adh. non-slip
HAZDWARNTPE-SA-NONSLP-YELL-BLACK-50MMX6M
Art.-no.
081244 672
EAN 4056807861043
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +44 03300 555 444.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 15,000 products
Non-slip reflective tape for hazardous areas in indoor and outdoor areas, such as the edge of steps and ramps, working areas, lifting platforms, workshop pits and wet areas.
- Self-adhesive
- For medium to high loads
- Prevents slipping and falling accidents
- With silicone paper
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Tape can be driven over by industrial trucks, passenger cars, commercial vehicles, etc. Revolving and turning on the tape should be avoided.
Notice
- Yellow-black tape for permanent hazard points and obstacles
- The butyl primer should be used outdoors. This significantly increases the adhesive strength of an adhesive tape on all surfaces.
- The adhesion surface must be dry and free from grease and dust.
Application area
Non-slip warning marking for hazard points indoors and outdoors, such as stairs and ramp edges, work areas, lifting platforms, workshop pits, wet areas.
Colour | Yellow-black |
Material | PVC - Polyvinyl chloride |
Adhesive base | Acrylate |
Length | 6 m |
Width | 50 mm |
Thickness | 1 mm |
Shelf life from production/conditions | Unlimited / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Product information
Datasheets (0)
Certificates/ Documents (0)
